大连优迅,优迅仪表,大连优迅仪器仪表有限公司
CN EN

The National Unified Service Hotline

4006060830

Mass Flowmeter High Viscosity Mass Flow Meter Micro-flow mass flowmeter Heat Tracing Jacket Mass Flow Meter Ultra-low temperature mass flowmeter High pressure mass flowmeter Coriolis force on-line densitometer Tuning fork online density/concentration meter
Coriolis force on-line densitometer
科氏力在线密度计

Applicable mediumLiquid fluid, slurry, suspension, high viscosity fluid, etc.

Not applicable medium Solid medium

0411-

84409900 / 84403377

Online consulting Online message
Product introduction

Overview:

 

    When the Coriolis online densitometer measures density, the measuring tube continuously vibrates at a certain resonance frequency. Because the resonance frequency is a function of fluid density, when fluids of different densities are filled with the vibrating tube, the vibration frequency will also change. Therefore, measuring the frequency change of the vibrating tube completes the density measurement, and the density has a unique linear relationship with the vibration frequency of the vibrating tube. This method is accurate and reliable in measurement, and has a wide measurement range suitable for various fluid density. The Kodensimeter has very small pressure loss and has inherent advantages in measuring the density of viscous fluids such as mud.

 

    In the current production process, there are more and more requirements for density measurement. The accuracy of density measurement directly affects the quality of the production process. Traditional density measurement uses the principle of buoyancy or radioactivity, and its measurement accuracy can meet the requirements, but the buoyancy density meter has certain limitations in practical applications. The density meter based on the radioactivity principle requires very high maintenance of the system and has certain damage to the human body, so it is only used in some special occasions. In the actual application process, we believe that the density measurement of the mass density meter based on the Koishi force principle can well meet the requirements of actual production and completely overcome the shortcomings of the buoyancy density meter.

 

Features:

 

    ● Low installation requirements can be installed vertically or horizontally on the measuring tube;

    ● Precision and high-quality stainless steel can withstand the wear caused by high-speed passage of various materials, and has a long life;

    ● High measurement accuracy, density measurement resolution can reach 0.002cm^3;

    ● The converter adopts a multi-variable digital processing system. Strengthen the filtering of the signal, greatly improve the sensitivity and accuracy of signal measurement, speed up the response time of the system, and make the measurement more reliable


Technical parameters

●Nominal diameter:  DN3~DN150

●Density measurement range: 0< ρ <5g/ cm³

●Density measurement accuracy:  ±0.002g/cm³

●Temperature measurement range: -200-350℃

●Temperature measurement accuracy:  ±1℃

●The temperature of the measured medium: -50℃-200℃

●Applicable ambient temperature: -40℃ -80℃

●Material: wetted part 316L shell 304

●Working pressure: conventional 4MPa, high pressure can be customized

●Output signal: 4-20mA DC current signal, 0-10KHz frequency pulse signal,

                          Pulse equivalent signal, RS485 communication signal

●Explosion-proof grade: Exd(ib) II CT6

●Protection: IP67