大连优迅,优迅仪表,大连优迅仪器仪表有限公司
CN EN

The National Unified Service Hotline

4006060830

Mass Flowmeter High Viscosity Mass Flow Meter Micro-flow mass flowmeter Heat Tracing Jacket Mass Flow Meter Ultra-low temperature mass flowmeter High pressure mass flowmeter Coriolis force on-line densitometer Tuning fork online density/concentration meter
气体质量流量计

Applicable mediumNatural Gas, gas, liquefied petroleum gas, torch gas, hydrogen and other gases

Not applicable medium Solid medium

0411-

84409900 / 84403377

Online consulting Online message
Product introduction


YS-TMF gas mass flow meter is widely used in steel plant, coking plant, petroleum, chemical industry, heat power, medical, thermal power plant, environmental protection and other industries.


● Gas Flow measurement in iron and Steel Plant and coking plant

● Boiler air flow, measurement of Secondary Air Flow

● Measurement of flue gas flow from chimneys

● Measurement of aeration flow in water treatment

● Gas flow measurement during cement, cigarette and glass plant production

● ●●● ●       ●●●●N     Compressed air

● Natural Gas, gas, liquefied gas, torch gas, hydrogen and other gas flow measurement 


Application example of gas mass flowmeter

 

● Petrochemical Industry

   Application: Torch Gas emission monitoring

   Product advantages: wide range ratio, sensor is not easy to jam, suitable for a wide range of gases

Electronics Industry

       APPLICATIONS: High Purity gas mass flow measurement

        Product advantages: no temperature and pressure compensation to directly measure the mass flow, the sensor head after a highly polished, can be used for trade settlement

         Product advantages: The product response is sensitive, reliable operation, no strict requirements for the installation of straight pipe section


●  Food Industry

        Application: The appropriate amount of gas is injected into the reactor to control the process and quality

        Product advantages: Sanitary Grade 3A, high purity, all liquid surface using stainless steel, wide range ratio





Technical parameters

                                                                                                                   

ACCURACY:

±1-2.5%

REPEATABILITY:

0.2% full range

Temperature range:

Ambient temperature-20 °C -- 70 °C

Medium temperature:

- 20-200 °C OR-20-350 °C

Power Supply:

24VDC/220VAC

Analog output:

4-20mADC

Response Time:

≤1 second

Temperature coefficient

0.05%/℃

Communication Interface:

RS485

Online display:

Liquid Crystal display instantaneous and cumulative flow

PROCESS STRESS:

≤4.2 MPA (any pressure greater than this shall be customized in consultation with the company)

Process link:

Farlane, if you need any other installation method, please consult with our company in advance

EXPLOSION PROOF RATING:

ExdIICT4

Level of protection:

Sensor IP67, transmitter IP65

Applicable media:

Water-free gas

Measuring Range:

0.05L-80M/S (Standard State is 20 °C, 0.10133MPA)

Sensor material:

The Standard is 316L; ha c; Ta

Rod Material:

Standard 1Cr18Ni9Ti; 316L; ha c; Tantalum

Shell material:

Install powder-coated aluminum castings in hazardous areas

Electrical interface:

M20×1.5

PRESSURE LOSS:

For pipe diameters larger than DN80, they are negligible